PVC-U WATER SUPPLY PIPE（630mm)

• Part No.
• 0802010123
• Manuf. No.
• Standard Pack Quantity
• 1

• For prices and availability please Register or add to cart and submit as enquiry.
• 　
• EACH

Description

Technical specifications of PVC-U water supply pipe:
1. The appearance The inside and outside surface of the pipe should be glossy, smooth, no breach, no concave, no decomposed and discolored line and no other exterior disfigurement that can affect the performance of the pipe. The pipe should not contain any visible extraneous matter. The end surface should be smooth after cutting, and be perpendicular to the axis of the pipe.
2. Opaqueness For the pipe to be used on the ground, opaqueness is required.
3. Length The length of the pipe is generally 4 meters or 5 meters or 6 meters, which can also be set by negotiation between both sides.
4. Color The color is generally grey. Other color can also be made according to the negotiation between both supplier and customers.
5. Sanitary properties Water supply PVC-U pipes and fittings are in conformity with the Health Evaluation Criterion about the potable water supply equipments and safeguard issued by Ministry of Health

6. Physical and mechanical property:

Item	Techical Index	Testing Method
Vicat softening temperature	≥80℃	ISO4422.2-2003
Longitudinal eversion	≤5%
dichloromethane Immersion	15℃±1℃, 30min, no hange on surface
(0℃ TIR)Falling eight mpact est	≤10%
Hydraulic pressure test	no hange &leakage
Connection sealing test	no hange &leakage

Technical specifications of water supply injection molded pipe-fitting
1. Color Generally the color is grey. It can also be set by negotiation between both parties.
2. Appearance The surface of pipe-fitting should be smooth and be no disfigurement of cracking, blister, desquamation, serious cold spots, apparent extraneous matter, uneven color and luster, decomposition, discoloration and so on.

3. Physical and mechanical properties

Property		Index
Vicat softening temperature		≥74℃
Oven test		Meet Gb/T8803-2001
Drop test		No change
Hydraulic Pressure test	dn	℃	Mpa	h	Index
	dn≤90	20	4.2×PN	1	no hange &leakage
			3.2×PN	1000
	dn>90	20	3.36×PN	1	no hange &leakage
			2.56×PN	1000